How much does stone-coated steel roofing cost?
Ashburn, VA

How much does stone-coated steel roofing cost?

Ashburn, VA

How much does stone-coated steel roofing cost?

$7 – $13cost per square foot installed
$12,200 – $25,900average total cost to install

Get free estimates for your project or view our cost guide below:

$7 – $13 cost per square foot installed

$12,200 – $25,900 average total cost to install

Get free estimates for your project or view our cost guide below:
Are you a pro? Get new customers
Tara Farmer
Written by
Tara Farmer
Edited by
Kristen Cramer
Fact-checked by
Tom Grupa

Stone-coated steel roofing cost

Stone-coated steel roofing costs $7 to $13 per square foot installed or$12,200 to $25,900 on average. Most homeowners spend around $19,500 for stone-coated metal roofing. Stone-covered metal roofs combine steel's strength and durability with a traditional asphalt shingle, wood shake, or clay tile aesthetic.

Stone coated steel roofing cost
Roof size (square feet) Average cost to install
1,000 $7,000 – $13,000
1,500 $10,500 – $19,500
2,000 $14,000 – $26,000
2,500 $17,500 – $32,500
3,000 $21,000 – $39,000
3,500 $24,500 – $45,500

Get free estimates from roofing companies near you.

Average cost to install stone-coated steel roofing

The following table shows the average cost to install stone-coated steel roofing.

Stone-coated steel roof cost - chart
Stone-coated steel roof cost - chart
National average cost $19,500
Minimum cost $7,200
Maximum cost $44,800
Average range $12,200 to $25,900

Stone-coated steel roofing prices per square

Stone-coated steel roofing costs $700 to $1,300 per square installed on average. Installing on battens typically costs more than direct-to-deck installation due to the extra labor and materials required.

Stone-coated steel cost per square
Factor Cost per square
Stone-coated steel roof materials $350 – $600
Installation labor $350 – $700
Remove old roof $100 – $300
Roof decking $200 – $500
Underlayment material $10 – $90
Battens $50 – $80

Stone-coated steel roofs may be installed directly over an existing roof, provided the old roof is in good condition. Still, most professional roofers recommend removing the old roof.

Stone-coated metal roof tiles & shingles cost factors

Factors affecting the cost of stone-coated roofing installation include:

  • Roof size – The higher the square footage, the more materials and labor required.

  • Stories, slope, & complexity – Multi-story homes and roofs steeper than a 6:12 pitch typically cost more due to the required equipment and safety measures. Multiple corners, peaks, and roof penetrations also increase the installation cost.

  • Brand – Major brands like DECRA, Gerard/Metro/Boral, and Roser USA cost more than lesser-known brands.

  • Style – Tile styles cost more than shingle and shake style roofing panels. Shingle styles are typically the cheapest option.

  • Panel thickness – Most stone-coated steel panels use 24- or 26-gauge steel. The thicker 24-gauge steel costs more but is more durable.

  • Installation method – Most stone-coated steel roofs are installed on battens, which increases the installation cost but adds ventilation and insulation and improves energy efficiency. Nailing the panels directly to the roof deck is the more common method for homes in high-wind areas.

  • LaborRoofers charge $3.50 to $7.00 per square foot to install stone-coated steel roofing.

  • Location – Installation costs more in areas with a higher cost of living.

  • Time of year – Roof installation costs more during peak roofing season or in freezing temperatures.

  • Ridge, hip, & rake – Installing the finishing roofing components lining the roof ridge, edges, and corners costs $6 to $10 per linear foot.

  • Water & ice shield – Installing an ice dam barrier costs $2 to $5 per square foot and may be required in cold, wet climates.

  • Removing old roofing – Removing and disposing of old roofing costs $1 to $3+ per square foot. Some stone-coated steel roofs are installed directly over the old roofing, saving on the total cost.

  • Permits – A roofing permit costs $150 to $500. Most contractors include permit fees in the roofing installation estimate.

  • Warranty – Many high-quality stone-coated steel manufacturers offer a 50-year transferable warranty covering high wind and hail damage, which may cost more up front than lower-quality roofs but adds home value and peace of mind.

  • Replacing raftersRafter replacement costs $7 to $30 per square foot.

  • Roof decking / sheathingReplacing a roof deck costs $2 to $5 per square foot, including installation.

  • Underlayment Underlayment replacement costs $0.10 to $0.90 per square foot for the material alone, depending on whether it is synthetic or rubberized.

  • Ridge ventingInstalling a ridge vent costs $200 to $700 on average.

  • PaintingPainting a metal roof costs $1,440 to $3,264 but painting a stone-coated steel roof may void its warranty. Hire a painter with experience walking on stone-coated steel to prevent denting.

  • Soffits and fasciaRepairing soffits and fascia costs $500 to $2,600.

  • Drip edgeDrip edge installation costs $1 to $3 per linear foot.

  • Inspection – An annual roof inspection costs $100 to $400.

Stone-coated steel roofing installed
Stone-coated steel roofing installed

Stone-coated roofing styles

Manufacturers design stone-coated steel roofing to mimic traditional roofing materials, including asphalt shingles, wood shake, and low- and high-arch tiles resembling Spanish and barrel clay tiles. Shingle styles typically cost the least. Tile profiles tend to fall at the higher end of the price range.

Stone-coated metal roofing price comparison

Metal roofing replacement costs $5 to $16 per square foot for uncoated or paint-finished metal, while stone-coated steel roofing costs $7 to $13 per square foot. Stone-coated metal roofing is more expensive but more durable than asphalt shingles and is comparable to or cheaper than several other longer-lasting roof types.

Get free estimates from roofing companies near you.
Stone-coated steel cost vs. other roof types
Type Average cost per square foot* Average total cost*
Stone-coated steel roof cost $7 – $13 $12,200 – $25,900
Metal shingle roof cost $6 – $14 $9,000 – $35,000
Standing seam metal roof cost $9 – $16 $13,500 – $40,000
Clay tile roof cost $8 – $25 $20,000 – $55,000
Concrete roof cost $7 – $19 $10,500 – $47,500
Slate roof cost $10 – $30 $22,000 – $70,000
Asphalt shingles cost $3 – $5 $5,700 – $12,000
Architectural/dimensional shingles cost $4 – $6 $9,000 – $16,000

*Including materials and labor.

Stone-coated steel roofing cost by manufacturer

DECRA, Boral, and Roser USA are industry-leading stone-coated steel roofing manufacturers. All three brands offer a 50-year limited, transferable warranty on their stone-coated steel roofing, covering damage from wind up to 120 mph and hail up to 2.5 inches wide.

Stone-coated steel roofing cost by manufacturer
Brand Average installed cost (per square)
DECRA $800 – $1,400
Metro / Gerard / Boral $750 – $1,450
Roser USA $1,200 – $1,400

Decra stone-coated metal roofing cost

DECRA roofing costs $8 to $14 per square foot installed. DECRA offers 26- and 28-gauge stone-coated steel roof systems in several shake, shingle, and tile styles and colors. DECRA's Shake XD, Shingle XD, and Villa tile lines boast a unique hidden fastening system and batten-less installation.

Metro / Gerard / Boral steel stone-coated roofing cost

Boral, Metro, and Gerard stone-coated steel roofing cost $7.50 to $14.50 per square foot, including installation. Options include 26-gauge panels resembling wood-like shake, stone-like shingles, two-color cottage shingles, high-barrel Spanish tiles, and Mediterranean villa tiles.

Gerard, Boral, and Metro steel shingle brands are part of the Westlake Royal Roofing Solutions company, with manufacturing facilities across the United States.

Roser USA stone-coated metal roofing cost

Roser USA stone-coated steel roofs cost $12 to $14 per square foot installed. Roser offers 26-gauge steel-coated roofs in shingle, shake, and Spanish tile styles. Roser Roofing began in Korea in 1978 and distributes roofing products worldwide to 75+ countries.

Stone-coated steel roofing advantages and problems

Get free estimates from roofing companies near you.

Stone-coated steel roofing costs more than traditional asphalt shingles but lasts longer and provides superior performance and efficiency, offering the highest possible fire and impact ratings and significant heat transfer reduction when installed on battens.

Stone coated steel roofing problems and advantages
Advantages Problems
  • Class A fire-resistant (highest rating)
  • Class 4 impact resistant (highest rating)
  • Low maintenance
  • Durable and long-lasting
  • Energy efficient
  • Sustainable; made from recycled or recyclable materials
  • Lightweight; less than 2 lbs. per square foot
  • Boosts home value
  • May install directly on old roof
  • Does not warp or crack
  • Expensive initial cost
  • Fewer color options than asphalt shingles
  • Requires an experienced installer
  • May need sound dampening underlayment, especially if the home has no attic space
  • Expands and shrinks with temperature changes
  • Walking on panels may dent them and void the warranty
  • May experience algae and mold growth in humid climates
  • Granular loss over time may damage curb appeal

What is stone-coated steel roofing?

Stone-coated steel roofing contains a structural grade steel sheet core, protective and corrosion-resistant coatings, and a thick layer of textured stone granules. The coated steel is stamped to resemble traditional roofing shingles, shakes, or tile.

Is stone-coated steel roofing worth it?

Stone-coated steel is worth it for homeowners who don't mind the initial cost. Stone-coated steel is durable, low-maintenance, and lasts 25 to 40 years longer than traditional roofing materials. Metal roof installation may also increase home value.

How long does a stone-coated steel roof last?

A stone-coated steel roof lasts 40 to 70 years on average. Stone-coated steel roofing has a metal core that withstands the elements and impacts better and longer than asphalt shingles or wood shake.

Are stone-coated steel roofs noisy?

Stone-coated steel roofs are not noisy when installed correctly. The roof deck, insulation, underlayment, and stone-coated steel's thick, textured coating, reduce noise to levels equal to or better than an asphalt shingle roof. Batten installation also adds sound-dampening space between the steel and sheathing.

Getting estimates from stone-coated steel roofing contractors

Before hiring a roofing company to install a stone-coated steel roof, be sure to:

  • Know your approximate roof square footage so you can confirm the estimate details.

  • Get at least three estimates to compare.

  • Look for licensed roofing contractors with experience in stone-coated steel roof installation.

  • Look for members of the Metal Roofing Alliance (MRA) and the National Roofing Contractors Association (NRCA).

  • Ask for references or a portfolio of previous jobs going back at least five years.

  • Browse their reviews on HomeGuide and Google.

  • Choose companies that are insured and bonded.

  • Avoid going with the lowest quote as quality may suffer.

  • Get a detailed contract and warranty in writing before the work begins.

  • Never pay in full before the project starts. Use a payment plan instead for work completed.

Questions to ask

  • How long have you been in business?

  • Are you licensed, bonded, and insured?

  • What experience do you have with stone-coated steel roof installation?

  • Do you have a portfolio of your previous roofing projects?

  • Will you use subcontractors?

  • How long will the project take?

  • How do you protect the yard and driveway during the installation?

  • Can you install the new roof over my existing shingles? If not, is removing the old roof included in the estimate?

  • What type of underlayment do you use? Is underlayment included in the estimate?

  • How long should the roof last?

  • Is there a warranty, and if so, what does it include?

  • What is and is not included in the estimate?

  • What additional costs should I expect?

  • Will you obtain the necessary permits?