How much does it cost to replace cabinet doors?
How much does it cost to replace cabinet doors?
$180 – $330 average cost per door installed
$2,200 – $6,600 average total cost to replace
Replacing cabinet doors cost
Replacing cabinet doors costs $180 to $330 per door or $2,200 to $6,600 for an average kitchen, including labor and the doors themselves. New kitchen cabinet doors and drawer fronts cost $30 to $300 each, depending on the size, material, style, and finish.
Many cabinet door installers use "per door" to refer to the cabinet opening, even if the opening has two doors.
| Kitchen size | Square feet | Average cost |
|---|---|---|
| Small kitchen | 70 – 100 | $1,800 – $4,000 |
| Average kitchen | 100 – 200 | $2,200 – $6,600 |
| Large kitchen | 200+ | $3,600 – $7,900 |
New cabinet doors cost per door
New cabinets cost $30 to $180 per door for materials only in most stock and custom designs.
| Type | Average cost per door* |
|---|---|
| Stock cabinet doors | $30 – $80 |
| Custom cabinet doors | $60 – $180 |
| Glass-front cabinet doors | $150 – $300 |
*Not including installation or hardware.
Labor cost to replace kitchen cabinet doors
The labor cost to replace cabinet doors is $140 to $230 per door or $1,700 to $4,600 for all the doors in an average kitchen. Labor typically includes:
Old cabinet door removal and disposal
Measuring for new doors and hinges
Preparing and protecting the kitchen
Acquiring and installing the new doors and hardware
Cleanup
| Factor | Average cost per door | Average total cost |
|---|---|---|
| Cabinet door | $40 – $100 | $500 – $2,000 |
| Replacement labor | $140 – $230 | $1,700 – $4,600 |
| Total cost | $180 – $330 per door | $2,200 – $6,600 |
Cost to replace cabinet doors by material, style, & size
Costs for replacing cabinet doors vary according to the material type, design, and size.
| Cabinet door material | Average cost per square foot* |
|---|---|
| Medium-density fiberboard (MDF) | $20 – $50 |
| Solid wood or plywood | $50 – $120 |
| Thermofoil (RTF) / laminate | $30 – $60 |
*Not including installation or hardware.
The following factors affect the replacement cost:
Material – Solid hardwood doors cost 25% to 150% more than MDF or Thermofoil doors.
Style – Raised-panel doors with more detail typically cost more than simple, recessed-panel doors.
Size – Larger doors require more materials, increasing costs. Many manufacturers charge more for non-standard door sizes.
Color / finish
Cabinet staining costs $4 to $15 per square foot. Look for pre-stained doors from cabinet retailers to reduce costs.
The cost to paint kitchen cabinets is $70 to $125 per door.
Repairs – Kitchen cabinet repairs cost $120 to $600, depending on the damage.
Cabinet door styles
Popular cabinet door styles include:
Slab / flat – A flat panel without decoration for a contemporary, minimalist look.
Recessed panel – A large, flat center panel surrounded by a raised frame of four boards or bevels.
Shaker – A recessed panel style door with a simple raised frame featuring no beveling or detail.
Beadboard / beaded – A center panel with vertical lines or grooves cut into the wood, creating a tongue-and-groove appearance.
Raised panel – A door with a thicker, raised center panel that tapers to a raised frame, creating a square or arched design.
Mullion – A glass-front door with a grid of wood braces dividing the glass panel into window-like panes.
Open frame – A door with a single glass center panel and no mullions.
Louvered – A door with a center panel of angled horizontal slats that allow air to pass through for improved ventilation.
Kitchen cabinet door overlays
A cabinet door overlay is the portion of the door on top that "overlaps" the cabinet frame when closed. The three overlay types are:
Full – The doors completely cover the cabinet face frame, with no gap between the doors or around the edges.
Partial – The cabinet frame is visible around the edges of each door and in the small gap between sets of doors.
Inset – The doors are set flush within the inside edge of the opening.
Cabinet door sizes
The following table shows common cabinet door sizes.
| Cabinet type | Height | Width |
|---|---|---|
| Base kitchen cabinet | 24" – 34" | 9" – 42" |
| Wall kitchen cabinet | 12" – 42" | 12" – 36" |
| Tall kitchen cabinet | 84", 90", or 96" | 18" – 36" |
Cabinet door hardware cost
Cabinet hardware costs $6 to $60 per piece with installation, depending on the style and material. Labor costs are cheapest for hardware matching the hole spacing in the existing doors and drawer fronts.
Replacing cabinet hardware is a simple DIY project if the center-to-center hole measurements are a match.
Cost to replace vs. reface kitchen cabinet doors
The cost to replace kitchen cabinet doors tends to be higher than refacing them, as shown below:
| Project | Average cost | Description |
|---|---|---|
| Cabinet door replacement | $2,200 – $6,600 |
|
| Cabinet refacing cost | $5,000 – $13,000 |
|
| Cabinet refinishing cost | $1,500 – $4,500 |
|
| Cabinet replacement cost | $4,500 – $15,000 |
|
Cabinet doors FAQs
Where to buy kitchen cabinet doors only
Buy kitchen cabinet doors at Home Depot, Lowe's, IKEA, or through online cabinet door retailers. When ordering online, confirm whether the hinges come with the doors or must be purchased separately.
How do you measure cabinet doors?
If replacing an existing cabinet door with a new door of the same size, measure the height and width of the back of the existing door.
Follow these steps to measure a cabinet box opening for new doors:
Measure the cabinet opening: Use a tape measure to measure the cabinet box opening from the left inside edge to the right inside edge and from the top inside rail to the bottom inside rail. Note the width and height to the nearest 1/16".
Calculate the overlay: Measure your existing cabinet doors to determine the overlay. Multiply the door overlay by 2.
Calculate the total door width and height:
Add the result of step #2 to the width to get the total door width.
Add the result of step #2 to the height to get the total door height.
Getting estimates from cabinet door installers
When hiring a cabinet door installer near you, be sure to:
Get at least three estimates to compare.
Select licensed, bonded, and insured companies that have been in business for 5+ years.
Browse their reviews on HomeGuide and Google.
Get a detailed estimate, contract, and warranty in writing before the work begins.
Avoid selecting the lowest quote as quality may suffer.
Never pay in full before the project starts.
Questions to ask
How many cabinet door replacement projects have you worked on?
Can you provide contact information for previous clients as references?
Should I reface the cabinet frames along with replacing the doors?
Do you recommend wood, MDF, or Thermofoil doors, and why?
Where do you source the doors?
Can I change the overlay for the new doors?
Does the estimate include hinges, knobs or handles, and hardware installation?
Are fees for old door removal and disposal in this bid?
How long will the project take?
Do you offer a warranty, and if so, what does it include?