How much does tile reglazing cost?
Ashburn, VA

How much does tile reglazing cost?

Ashburn, VA

How much does tile reglazing cost?

$4 – $12cost per square foot
$300 – $1,200bathroom, tub, and shower tiles (40 – 100 SF)
$400 – $3,000master bathroom or kitchen (100 – 250 SF)

Get free estimates for your project or view our cost guide below:

$4 – $12 cost per square foot

$300 – $1,200 bathroom, tub, and shower tiles (40 – 100 SF)

$400 – $3,000 master bathroom or kitchen (100 – 250 SF)

Get free estimates for your project or view our cost guide below:
Jennifer Carlson
Written by
Jennifer Carlson
Edited by
Kristen Cramer
Fact-checked by
Tom Grupa

Tile reglazing costs

Tile reglazing costs $4 to $12 per square foot or $300 to $1,200 for an average bathroom, tub, and surrounding shower tiles. Reglazing a master bathroom or kitchen costs $400 to $3,000 on average.

DIY tile refinishing kits cost $50 to $200 on average.

Reglazing is also called tile refinishing or resurfacing and restores the appearance of a tile floor, bathroom, tub, shower, or backsplash.

Ceramic tile refinishing cost
Rate Average cost
Cost per hour $40 – $120
Cost per square foot $4 – $12
Cost per room (150 – 250 SF) $600 – $3,000

Kitchen, shower, & bathroom tile reglazing costs

The following tables shows the average costs to reglaze bathroom, shower, or kitchen tiles.

Tile reglazing costs
Room Square footage Average cost
Bathtub and surrounding shower tile 80 – 100 $300 – $1,200
Average bathroom or mudroom 40 – 100 $150 – $1,200
Average kitchen, bedroom, or master bathroom 100 – 250 $400 – $3,000
Large kitchen, living room, or master bedroom 200 – 450 $800 – $5,400

Refinishing ceramic tile with paint and a high-gloss epoxy coating.
Refinishing ceramic tile with paint and a high-gloss epoxy coating.

The following factors affect the cost of tile reglazing:

  • Area size / rooms – A large floor or refinishing in multiple rooms costs more than a smaller job. However, costs per square foot are higher for small projects due to minimum job fees.

  • Dirt / grime level – Tile typically costs more to refinish when exposed to heavy grime or prolonged foot traffic.

  • Labor cost – Tile contractors charge $40 to $120 per hour for refinishing, depending on their experience. Labor makes up 70% to 80% of the total project cost.

  • Tile condition – Professionals recommend completing any necessary tile or grout repair before refinishing.

  • Project location – A small shower may be harder to refinish than an open floor due to limited accessibility.

Cost to reglaze tub and tile

The cost to reglaze tub and tile is $250 to $600 for the bathtub only and $800 to $1,200 for the tub and surrounding shower tile. Reglazing or resurfacing a tub is more affordable than a full replacement and lasts 10 to 15 years.

DIY cost to refinish tiles yourself

DIY tile refinishing kits costs $50 to $200 on average, depending on the project area. Hardware stores such as Home Depot and Lowe’s sell epoxy acrylic reglazing kits with the following steps:

  1. Clean any dirt or residue from the tile.

  2. Repair any cracks or dents in the tile, grout, and caulk.

  3. Sand the tile so the solution will adhere.

  4. Line edges with painter’s tape.

  5. Apply the primer and refinishing product.

Tile refinishing cost vs. replacement

Tile replacement costs $7 to $25 per square foot, depending on the tile type and size. Refinishing costs less than a full replacement and may be a better option unless the tile and grout are heavily worn or broken.

Tile reglazing FAQs

Can ceramic and porcelain tiles be refinished?

Yes, professionals commonly refinish ceramic and porcelain tiles.

Is tile refinishing worth it?

Tile refinishing is worth it unless the tiles are badly damaged. Refinishing is faster, cheaper, and less messy than tile replacement.

What’s the difference between tile refinishing, resurfacing, and reglazing?

Professionals use the terms refinishing, resurfacing, and reglazing interchangeably to mean giving tiles a new layer of finish.

How long does tile reglazing last?

Tile reglazing lasts 10 to 15 years on average, or less when the tile is exposed to high levels of moisture and foot traffic.

Can you paint ceramic tiles?

Yes, ceramic tile tolerates certain epoxy or tile paints. Painting costs less than reglazing but may bubble or peel when used on a shower, bathtub, or countertop.

Getting estimates from tile refinishing companies

Before hiring a tile reglazing company for tile refinishing, be sure to:

  • Get at least three estimates to compare.

  • Read reviews on HomeGuide and Google.

  • Ask for references and browse their portfolio of recent projects.

  • Select licensed, bonded, and insured companies that have been in business for 5+ years.

  • Get a detailed estimate, contract, and warranty in writing before work begins.

  • Avoid choosing the lowest quote as quality may suffer.

  • Never pay in full before the project starts.

Questions to ask

  • How long have you been in business?

  • Do you have any certifications?

  • Are you licensed, bonded, and insured?

  • How long will the project take?

  • How long should I wait before using this room?

  • Does the estimate include cleanup costs?

  • What other costs should I expect?

  • What permits do I need, and will you obtain them?

  • What will I need to do to prepare my home before the project begins?